Description

Note: Will Only Fit 3-7/8 axle

Note: FREE SHOCK BOOT COVERS

Featured Technology & Benefits:

• Heavy duty greasable control arms included
• Extended Length Urethane Bump Stops
• Track Bar Relocation to properly center your axle
• Pitman Arm included to maintain steering geometry
• Completely Bolt on System

Notes:

• This truck was produced with different rear axles. Measure the diameter of your rear axle before ordering.
• This system will not fit dually applications due to the rear u-bolt size.
• 2-piece rear driveshaft requires carrier bearing drop kit D5505.
• Gas models may sit approximately 1/2in higher than the advertised lift height.
• Kit includes a 3in rear block kit. Measure your truck before ordering to determine the stance of your truck with the lift installed.
• Power Wagon models came factory with a 2in taller ride height so the net lift gain will be 3in over the factory Power Wagon. Power Wagon models require sway bar link kit D5301.

Quick Specs

• Front Lift Height: 5 Inch
• Front Lift Method: Coil Springs
• Rear Lift Height: 3 Inch
• Rear Lift Method: Block & U-bolt Kit
• Install Time Hrs: 6-8
• Difficulty Level 1-5: 3
• Wheel Size: 17 X 9
• Back Spacing: 5 Inch
• Max Tire Size: 36 X 12.50

This 4.5in system will give you an offroad worthy truck that you can still use as a daily driver. Not only is this system over 90% Made in the USA, this system has many advantages over the competition including new coil over struts instead of strut spacers. By replacing the struts, Zone Offroad enhances the valving to control the unsprung weight of a 33in tire for a drastic increase in ride and handling performance over simple strut spacers. The crossmembers are made from 1/4in thick steel and maintain a clean appearance. They are locked together with two strut bars to add rigidity. The CNC machined ductile iron steering knuckles ensure proper steering and control arm geometry and do not limit you to 18in or larger wheels or require you to cut off the upper control arm droop limiter like the competition. By retaining the factory droop limit, you don’t need to worry about excessive ball joint or steering component wear and be certain the system works with the truck’s Stabilitrack System. The differences don’t end there, Zone Offroad only uses solid cast rear lift blocks as opposed to fabricated blocks. If you need additional rear height, Zone offers a add-a-leaf to fight spring wrap and yield additional height. Combine all of these factors and you can lock in the Zone 4.5in system as the best value out there! Your search has ended.

Fitment

• UPC: 655623718582
• Brand: Zone OffRoad
• 2008 Dodge Ram 2500 3500

Document

Video