Description
Featured Technology & Benefits:
- Strut Top Spacer with optional pre-load spacer
- Factory Like Ride And Handling Characteristics
- Differential Skid Plate Included
- CNC Machined Steering Knuckles
- Rear Fox Adventure Series Shocks Included
Important Notes!
Not recommended for AWD models.
These trucks are typically between 1inin and 3inin tail high. Please measure your truck and order the appropriate rear lift height.
TRX models will achieve aproximately 1inin of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4inin lift system for about 5inin of lift or replace the TRX struts with standard struts for use with this system.
ATTENTION STATE OF CALIFORNIA CONSUMERS:
Proposition 65 WARNING!
Quick Specs:
- Front Lift Height: 6 Inch
- Front Lift Method: Upper Strut Mounts
- Rear Lift Height: 3 or 5 Inch
- Rear Lift Method: Coil Springs
- Install Time Hrs: 8-10
- Difficulty Level 1-5: 3
- Wheel Size: 17 x 9
- Back Spacing: 4.5 Inch
- Max Tire Size: 37 x 13.50
- Wheel Size: 18 x 9
- Back Spacing: 5 Inch
- Max Tire Size: 37 x 13.50
- Wheel Size: 20 x 9
- Back Spacing: 5 Inch
- Max Tire Size: 37 x 13.50
The Zone Dodge Ram 1500 pickup 6in Suspension Kit System for 2009-2011models is centered around two main crossmembers that are locked together with a substantial differential skid plate. CNC machined steering knuckle correct steering geometry while reducing installation time. Strut top spacers are used to lift the vehicle and maintain the factory ride. Strut dissaseembly is only required if the optional preload spacers included in the kit are used. The rear is lifted with new Zone coil springs, track bar relocation and a rear four link relocation system. Two rear lift height options are 10 and when combined with the included optional front pre-load spacers, really allows you to fine tune the stance of your truck.
Fitment
Brand: Zone OffRoad
Document
Video
Reviews
There are no reviews yet.